BETCO Stealth ASD26BT Bedienungsanleitung PDF herunterladen (Seite 45)

BATTERY CHECK CARD – HOUR METER

1. Verify that when turning on the machine the battery check card has the

following starting sequence:

• Turning on of the LED which correspond to the set-up (red LED = “0”).

• Turning on of all the LEDs (check of the lamps)

• Turning on of the LEDs depending on the charge of the battery

2. Verify the hour meter functionality

• To verify which is the set-up you turn on the machine and check which

is the ﬁrst LED that turns on. Counting the LEDs since the left side any

LED correspond to a position and the LED which turn on correspond to

the current set-up.

• Verify that if the machine uses wet cell batteries the adjustment is on

position 1.

• Verify that if the machine uses GEL batteries the adjustment is on posi-

tion 4.

WARNING: A wrong set-up of the battery control card can

compromise the battery efﬁciency and damage then in ir-

reversible way.

1. Verify the cleanness and functionality of the solution ﬁlter under the

solution tank plug.

2. Check cleanness and sealing of the solution ﬁlter.

3. Conﬁrm that solution tank is completely ﬁlled.

4. Verify the sealing of the hoses, solenoid valve and the water valve.

5. Verify that the solution, with valve completely open, falls continuously

on the ﬂoor.

WATER PLANT INSPECTIONS

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51 52

Keine Kommentare

BETCO Stealth ASD26BT Bedienungsanleitung Seite 45